Honeywell Dolphin 7600 Podręcznik Użytkownika Strona 1

Dolphin® 7600 Mobile Computerwith Windows Mobile® 6User’s Guide

1 - 2Approvals by Country R&TTE Compliance Statement—802.11b/g, Bluetooth, and/or GSMDolphin RF terminals are in conformity with all essential req

8 - 8Voice CommunicationYou can use the Dolphin terminal as a phone via the GSM radio.Audio ModesThere are two audio modes: Speakerphone and Headset.S

8 - 9Accessing the Dialer WindowWhen the GSM radio is active, tap Start > Settings > Connections tab > Dolphin Wireless Manager, then tap Men

8 - 10Setup OptionsOn the Dialer window, tap Menu > Options.You can also tap Start > Settings > Personal tab > Phone when the GSM radio

8 - 11RoamingYou can select automatic or manual roaming. The Phone defaults to automatic roaming.1. When an active SIM card is inserted in the termina

8 - 12

9 - 19Working with the Bluetooth RadioEnabling the Bluetooth RadioYou enable the Bluetooth radio in the Dolphin Wireless Manager (see page 7-6). 1. Ta

9 - 2Connecting to Other Bluetooth DevicesYou need to perform a device discovery and then select a discovered device and connect to it. Pairing happen

9 - 34. You are prompted to enter a passcode. If the device has a specific passcode, enter it in the Passcode field and tap Next.If the device does no

9 - 48. The device appears in the list on the main window. 9. After the passcodes have been accepted on both sides, you have a trusted (“paired”) conn

9 - 5Types of Devices and ServicesWhen you tap Add new device on the Devices tab, the Bluetooth radio scans for discoverable Bluetooth devices in rang

1 - 3For further information, please contact:Hand Held Products BV, a wholly owned subsidiary of Honeywell International Inc.Nijverheidsweg 95627 BT E

9 - 6Connecting to Bluetooth Printers1. Make sure the Bluetooth printer is in range and set to be discoverable by other Bluetooth devices.2. Look up t

9 - 7Transferring Files 1. Tap Start > Programs > File Explorer.2. Navigate to the file you want to transfer.3. Tap and hold on the file and sel

9 - 8Making the Terminal DiscoverableBy default, the Dolphin terminal is not discoverable, which means that the terminal will not be found by other Bl

10 - 110Dolphin 7600 with GPSOverviewGPS functionality can be integrated into certain Dolphin 7600 terminals. There’s no need to carry multiple device

10 - 2Suspend/Resume with GPSWhen the terminal goes into suspend mode, power is removed from the GPS module. There are two ways to control the Suspend

10 - 3Serial CommunicationsThe GPS module sends data to serial COM port 2 of the terminal. The default data rate is 57600 bps, which is non-configurab

10 - 4

11 - 111Dolphin HomeBase DeviceOverviewThe Dolphin HomeBase device is a charging and communication cradle that supports full-speed USB 1.1 communicati

11 - 2Front Panel Terminal Well Place the terminal in this well to communicate with a host device, power the terminal, and charge its battery. Dock LE

11 - 3Back Panel Pivot ConnectorThis pivoting connector swivels 90 degrees. The default position is horizontal, with the connectors facing straight ou

1 - 4Waste Electrical and Electronic Equipment InformationThis product has required the extraction and use of natural resources for its production. It

11 - 4PowerThe terminal requires 5 volts DC input for communication and battery charging; the power adapter on the power cable converts the voltage fr

11 - 5Charging the Main BatteryBattery packs achieve a full charge in less than four hours. As battery packs charge, the charging circuitry follows th

11 - 6Mounting If you want to mount to a vertical surface, be sure to provide enough workspace with good lighting for the user to view and operate the

11 - 7Bottom Panel DimensionsNote: The pivot connector should be facing straight out the bottom panel (as shown) when mounting the base to a vertical

11 - 8

12 - 112Dolphin QuadCharger DeviceOverviewThe Dolphin QuadCharger device is a four-slot charging station that charges up to four Li-ion battery packs

12 - 2Back PanelPower Supply ConnectorAttach the power supply to this connector. The universal power supply accepts input voltages between 90-265 volt

12 - 3Battery ChargingInserting and Removing Battery Packs To insert a battery pack, place the end of the battery without the locking tab into the bot

12 - 4Mounting The charger should be mounted on a dry, stable surface such as a desktop or workbench, or a flat, vertical surface such as a wall.Mount

12 - 5Bottom Panel Mounting DimensionsDIN Rail DimensionsMounting Guidelines1. Before you begin, make sure you have two screws that are size #5–diamet

2 - 12Getting StartedOut of the BoxVerify that your carton contains the following items: • Dolphin 7600 mobile computer (the terminal)• Main battery p

12 - 6TroubleshootingIf you encounter problems, refer to chart below for possible solutions. If problems persist, please contact Technical Assistance

13 - 113Dolphin Mobile MountOverviewThe Dolphin Mobile Mount provides easy and secure access to the Dolphin terminal in mobile environments.We recomme

13 - 22. The latch at the top should grip the back of the image engine window slot. Image Engine WindowLatch

13 - 3Mounting The Dolphin Mobile Mount ships with a standard RAM mount (101B). You attach one ball joint that you attach to the back panel of the mou

13 - 4Then, you attach the rest of the RAM mount.Then, fasten the RAM mount to a stable surface.

14 - 114Technical Specifications Terminal Technical SpecificationsBasic FeaturesOperating System: Windows Mobile 6.0 (Professional and Classic versio

14 - 2 Composite Codes: Aztec Mesa, Codablock F, EAN·UCC, GS1 Databar-14OCR: OCR-A, OCR-B, OCR-US Money FontPostal Codes: Postnet and most internati

14 - 3Dolphin HomeBase DeviceStructuralDimensions 4 in. high X 4.4 in. wide X 3.7 in. deep (10.2 cm. X 11.2 cm. X 9.4 cm.)Weight 11.2 oz. (318g)Mater

14 - 4Dolphin QuadCharger DeviceStructuralDimensions 11 in. long X 4.8 in. wide X 1.5 in. high(27.9 cm. long X 12.2 cm. wide X 3.8 cm. high)Weight 15.

15 - 115Customer SupportTechnical AssistanceIf you need assistance installing or troubleshooting your device, please call your distributor or the near

2 - 2Step 3. Boot the Terminal The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or interrupt the boot

15 - 2North AmericaTelephone: (800) 782-4263Fax: (803) 835-8012E-mail: [email protected] AmericaTelephone: (803) 835-8000 Telephone: (

15 - 3Limited WarrantyHoneywell International Inc. ("HII") warrants its products and optional accessories to be free from defects in materia

15 - 4How to Extend Your WarrantyHoneywell International Inc. offers a variety of service plans on our hardware products. These agreements offer conti

™ Honeywell700 Visions DriveP.O. Box 208Skaneateles Falls, NY 13153-020876-WM-UG Rev D7/14/2009

2 - 3Icons in the Navigation BarIndicator MeaningThe terminal could not synchronize data with the workstation via ActiveSyncNew e-mail or text message

2 - 4Command BarLocated at the bottom of the Today screen, the command bar displays running applications.RoamingRadio is disabledThe radio is not conn

2 - 5Selecting ProgramsTapping Start opens the drop-down menu, which provides access to the most common system functions and programs. To open a progr

2 - 6

3 - 13Hardware OverviewStandard ConfigurationsHardware FeaturesSee• Front Panel Features on page 3-3• Back Panel Features on page 3-10• Side Panel Fea

DisclaimerHoneywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document w

3 - 2Peripherals The following items are sold separately and enhance the capabilities of your Dolphin terminal.Dolphin HomeBase™ DeviceThe Dolphin Hom

3 - 3Front Panel FeaturesDecode and Scan LEDsThe Scan LED lights red when you press the Scan trigger in scanning applications.The Decode LED lights gr

3 - 4Touch Screen DisplayThe display is a 65,536-color LCD (Liquid Crystal Display) covered by a touch screen lens. The 2.8” 1/4 VGA (Video Graphic Ar

3 - 51. You will need a strong, flat, plastic card (a credit card, for example) to wedge under the existing screen protector.Note: If you have one, yo

3 - 64. Wipe the screen with a clean, non-abrasive, lint-free cloth.Note: Use ionized air, if available, to blow additional dirt or particles off the

3 - 72. Clean the touch panel thoroughly with a clean, non-abrasive, lint-free cloth. Make sure nothing is attached to the top of the touch panel.3. R

3 - 86. Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but firmly. 7. Use the card as necessary to sm

3 - 911. Clean the surface of the screen protector with a clean, non-abrasive, lint-free cloth.12. Press the Backlight key to wake the terminal.13.

3 - 10Back Panel FeaturesAccessory AttachmentUse this button to attach accessories; see Using the Accessory Attachment on page 3-11.Finger SaddleThis

3 - 11Using the Accessory AttachmentThe accessory attachment is a standard tab designed to fit universal accessories available for most cell phones. A

iiiTable of ContentsChapter 1 - Agency ApprovalsLabel Locations...

3 - 12Side Panel FeaturesNote: This graphic shows the left side of the terminal.Access DoorThis door covers the memory card slot. To increase memory,

3 - 13Side DoorThe rubber door on the left side panel provides access to the Headset and DC power jacks. When closed, the side door seals the terminal

3 - 146. Replace the access door and tighten the screw. The access door must be properly sealed before resuming terminal operation. Failure to seal th

3 - 15Bottom Panel FeaturesHand Strap SlotThere is an adjustable, elastic hand strap available for purchase with the terminal. When installing the han

3 - 16Connecting the USB CableConnect the USB cable to the I/O connector to facilitate USB communication between the terminal and host workstation.*Th

3 - 17Connecting the Power CableThe power port on the back end of the USB connector fits the power cable that comes with each terminal. To charge the

3 - 18ActiveSync CommunicationTo synchronize, ActiveSync 4.5 or higher must be installed and configured for the appropriate communication type on the

3 - 19Setting Up the Host WorkstationVerify that ActiveSync is configured to use the appropriate communication type by clicking File > Connection S

3 - 20The Mobile Device folder opens in Windows Explorer. The terminal is now treated as a mass storage device, and transferring files is as simple as

3 - 21Battery PowerDolphin terminals feature intelligent battery technology with two types of battery power: • The main battery pack on the back panel

ivChapter 4 - Using the KeyboardsOverview...

3 - 22• Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal.• Never throw a used battery in the trash

3 - 232. Drill-down to HKEY_LOCAL_MACHINE > System > CurrentControlSet > Control > Power. 3. Change the Value Data of the BattPowerOff and

3 - 24Internal Backup BatteryLocated inside the terminal, the backup battery is a 2.4V nickel metal hydride (NiMH) battery.The internal backup battery

3 - 25Resetting the TerminalThere are two ways to reset the Dolphin terminal: a soft reset and a hard reset. Soft Reset (Warm Boot)A soft reset re-boo

3 - 26Suspend Mode Suspend mode suspends terminal operation. The terminal appears to be “off” when in suspend mode. The terminal is programmed to go i

4 - 14Using the KeyboardsOverviewThere are two keyboard options: a 29-key keyboard and the 38-key keyboard. The buttons are recessed under the overlay

4 - 2Function KeysFunction keys appear on both keyboards and perform specific functions.Modifier KeysModifier keys modify the next key pressed to perf

4 - 3Alpha/Numeric IndicatorThe Navigation bar features an icon that indicates the alpha/numeric status of the keyboard. This icon changes when the ke

4 - 429-Key Numeric Keyboard Navigation KeysLocated in the center of each keyboard for easy access with either hand, the navigation keys enable you to

4 - 5Hardware Application ButtonsThese four buttons are programmed to launch software applications when the Today Screen (see page 2-2) is on the scre

vSystem Tab ... 6-7About ...

4 - 6Toggling Between Alpha and Numeric ModesThe 29-key keyboard defaults to numeric mode, which means that the keyboard boots up to numeric mode afte

4 - 729-Key Blue Key Combinations (Alpha Mode) Tap the Blue modifier key to switch to alpha mode for the next key pressed.Double-tap the Blue modifier

4 - 829-Key Red Key CombinationsSpecial CharactersFunctions9 (0 )Key Combination CharacterRed + Left Arrow -Red + Right Arrow +Red + BKSP *Red + SP #R

4 - 9Red + 9 F9Red + 0 F10Key Combination Function

4 - 1038-Key Alpha KeyboardToggling Between Alpha and Numeric ModesThe 38-key keyboard defaults to lowercase alpha mode, which means that the keyboard

4 - 1138-Key Red Key CombinationsKey Combination FunctionRed + ESC (hold) Soft reset (warm boot)Red + TAB (hold) Hard reset (cold boot)Red + Down Arro

4 - 1238-Key NUM Lock Mode • To switch to numeric mode for the next key pressed, tap the NUM key once. • To lock into numeric mode, double-tap the NUM

4 - 13Special FunctionsKey CharacterA Volume upF Volume downE SP

4 - 14

5 - 15Using the Image EngineOverviewThe Dolphin terminal houses a compact image engine using Adaptus™ Imaging Technology that instantly reads all popu

viVoice Communication... 8-8Audio Modes...

5 - 2Supported Bar Code Symbologies Symbology Type Symbology Name1D SymbologiesCodabar Code 3 of 9Code 11Code 32 Pharmaceutical (PARAF)Code 93 Code 12

5 - 3Activating the EngineWhen a scanning application is open, press the SCAN key to activate the image engine. You can also press one of the side b

5 - 45. When the bar code is successfully decoded, the decode LED lights green and the terminal beeps.Sample Bar CodesYou can use the following bar co

5 - 5Capturing ImagesThe image-capture process is an intuitive, split-second operation for experienced users. By following basic guidelines, however,

5 - 6

6 - 16System SettingsOverviewCustomized settings are available on the Start menu. Tap Start > Settings and settings screen opens displaying the Per

6 - 2Personal TabTo access the Personal tab, go to Start > Settings. The screen opens displaying the Personal tab.Note: Personal settings are store

6 - 3ButtonsButtons programs both keyboard buttons and the side buttons to launch applications or execute commands. The default button assignments tha

6 - 4Additional FunctionsThe Assign a program list also contains the following commands: Input The Input settings enables you to customize input from

6 - 5MenusYou can add existing programs you use often, such as File Explorer, to the Start menu for faster access. You are not installing the program,

viiChapter 13 - Dolphin Mobile MountOverview...

6 - 62. Tap and hold on the program, then tap Copy on the pop-up menu. 3. Navigate to the Windows folder and open the Start Menu (My Device > Windo

6 - 7System TabThe System tab enables you to verify and sometimes alter system parameters. To access the System tab, go to Start > Settings > Sy

6 - 8BacklightThe Backlight system setting enables you to customize backlight functionality for the display. The backlight for the color display is us

6 - 9Clock & AlarmsThis setting sets the system clock, which means that all scheduled items run according to this setting. The time and date need

6 - 10External GPSIf a Windows Mobile 6.0-based device is equipped with a GPS module, External GPS is a Microsoft tool that determines which port an e

6 - 11Storage Card TabThis tab displays the current capacity and usage statistics of the selected memory type; IPSM or Storage Card. Select the memory

6 - 12PowerPower system settings contains three tabs: Battery and Advanced. Note: You can also set automatic turn-off times for the terminal to conser

6 - 13Remove ProgramsRemove Programs enables you to remove programs installed on the terminal. Use this setting to troubleshoot when you receive messa

6 - 14ScreenThe Screen system setting contains three tabs: Alignment, Clear Type, and Text Size.Alignment Tab Orientation–The default orientation for

6 - 15WAN InfoWhen the GSM radio is active, WAN Info displays useful statistics for the radio.To verify whether or not the GSM radio is enabled, check

viii

6 - 16

7 - 17Connecting the TerminalConnections TabThe Connections system setting provides access to the terminal’s various communication options. Icon De

7 - 2Infrared CommunicationUsing the IrDA port, you can send and receive data between the terminal and other devices equipped with infrared. This can

7 - 35. When the IrDA port finds the IrDA port of the other device, it immediately starts sending the selected file. The selected device reads “Sendin

7 - 4Connections ManagerThe connections manager sets up various network connections to Internet Service Providers (ISPs) via external modem.To open th

7 - 5Proxy Server ConnectionsIf you are connected to your ISP or private network during synchronization, the terminal should download the proper proxy

7 - 6Dolphin Wireless ManagerThe Dolphin Wireless Manager provides a centralized interface that enables and disables all the on-board radios. Each rad

7 - 72. Tap anywhere inside the rectangle or the OFF button inside the rectangle. The radio begins activating.3. When the radio is activated (i.e., tr

7 - 8COM Port Assignment Table7600 with Windows Mobile Professional (with GSM): 7600 with Windows Mobile Classic (without GSM): COM Port DescriptionC

7 - 9Network CardsThe Network Cards setting displays the network cards installed in the terminal.1. Tap Start > Settings > Connections > Netw

1 - 11Agency ApprovalsLabel LocationsDolphin 7600 terminals meet or exceed the requirements of all applicable standards organizations for safe operati

7 - 10USB to PCThe USB to PC applet enables you to switch between RNDIS (Remote Network Driver Interface Specification) USB and Serial USB communicati

7 - 11Installing Additional SoftwareDolphin terminals ship with the operating system, radio drivers, and custom Honeywell software already installed.

7 - 122. Follow the directions on the workstation screen. The installation process includes transferring the software to the terminal via ActiveSync.

8 - 18Working with GSMOverview The Dolphin 7600 can be configured with an integrated, embedded GSM/GPRS EDGE quad-band radio module for WWAN communica

8 - 2Voice and Data CommunicationDolphin terminals with integrated GSM/GPRS radios are optimized for the following two-way voice and data communicatio

8 - 37. Place the SIM card in the base of the connector with the contacts facing down so that those contacts connect with the SIM card interface.8. Fo

8 - 4Enabling the GSM RadioBe default, the GSM radio should be enabled after each Hard Reset (Cold Boot) (see page 3-25). Verify the status of the rad

8 - 5Data CommunicationYou set up data communication via the connections manager. The carrier on the SIM card is the ISP.System Requirements• The GSM

8 - 64. Enter the APN and tap Next.5. Enter the username and password from the account and tap Finish.6. On the Connections window, tap Manage existin

8 - 77. Tap and hold on the connection and select Connect on the popup menu.8. The network icon in the Navigation bar indicates the GSM radio is attem