Honeywell HEGS5001 Instrukcja Użytkownika Strona 44

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 68
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 43
5.2.11 Delete a Tour
1. Press the Dome Menu (
1. ___
3. ___
) key.
2. Press + or – until Tour Menu is displayed.
3. Press Enter (
).
4. Press + or – until Delete is displayed.
5. Press Enter (
).
6. Enter the desired tour # (1-3) using the numeric keys.
7. Press Enter (
).
5.2.12 Programming Sector IDs
Sector IDs are used for labeling specific areas that the PTZ camera views. Whenever a
PTZ camera is under manual control and it is viewing a programmed sector, the name
given that sector is added to the video signal.
Note: The camera ID display must be enabled. When an operator is viewing the monitor
or a video recorder is recording a specific dome, this labeling provides a quick
reference for the area being displayed. Up to 16 Sector IDs can be programmed
for each Scan Unit.
1. Press the Dome Menu (
1. ___
3. ___
) key.
2. Press + or - until Sector/Priv Menu is displayed.
3. Press Enter (
).
4. Press + or – until Program is displayed.
5. Press Enter ( ).
6. Enter the desired sector number (0-15) to program.
7. Press Enter (
).
Rev. 1.01 34 900.0800
19-Jun-06
Przeglądanie stron 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 67 68

Komentarze do niniejszej Instrukcji

Brak uwag